|
MHSC Modified Sports GT 2009
ELIGIBLE CARS
Ninco : Mercedes CLK GTR, Ferrari F50, BMW V12 LMR(99), BMW LM V12(98), Mclaren F1 GTR, Porsche GT1, Porsche GT3, Callaway C12, BMW M3, Honda NSX, Toyota Supra, Mosler MT900R, Nissan 350Z, Renault Megane.
FLY: Porsche GT1 98 all versions including Evo 3, Porsche GT1 & Evo, Joest Porsche, Panoz Roadster, Panoz GT, Chrysler/Dodge Viper, Venturi, Marcos, Chevrolet Corvette including new Shape, Lola B98 including Evo, BMW M3, Saleen S7R including Evo.
SCX: Ferrari F40, Ferrari 333SP, Cadillac Northstar, Porsche GT1, Audi R8 & R10, Dome,
Seat Cupra GT, Ferrari 550 Maranello, Ferrari F360, Aston Martin DBR9, Corvette, Peugeot 908.
Scalextric: Porsche GT1, Porsche GT3, Mercedes CLK LM, TVR Speed 12, Cadillac Northstar, MG Lola, TVR Tuscan, Ford GT 2003, Dodge Viper, Lister Storm LMP, Maserati MC12, Maserati Trofeo, Honda NSX. Nissan 350Z, Nissan Skyline, Toyota Supra, Aston Martin DBR9.
Proslot: Porsche GT2, Ferrari F355, Ferrari F360, Toyota GT1, Porsche GT3.
Carrera : Audi R8, Porsche GT1 98, BMW LM, Bentley, Ferrari Enzo, Ferrari 575 GTC, Maserati MC12.
Slot It: Audi R8C, Porsche 956/962, Nissan R390, Sauber Mercedes C9, Jaguar XJR9, Lancia LC2. Mclaren F1 GTR
Spirit: Lola B2K, Reynard 2KQ all versions, Dallara all versions, Peugeot 406 all versions, Courage.
Cartrix: Honda NSX, Porsche Boxster.
MRRC: Toyota GT1
NSR: Mosler MT900R, Renault Clio.
Avant: Audi R10 (std not lightweight)
Sloter: Zytek.
New Cars from Avant are being evaluated for introduction on 1st June.
ELIGIBLE MOTORS
NC1, NC2, NC3, NC4, NC5, NC6, NC7, Reprotec NC2 clones, RX4, RX6, RX Pro Turbo & Plus, Mabuchi S, Pro Slot Evo 1,2, 3, & 4, Oz Race Mabuchis, Red Bull, Slot It V12 and Boxer, Fly Mabuchi, Fly Racing, Fly Evo, Fly Truck, all MRRC/Scaleauto, all Cartrix, all Spirit, MB Slot, NSR Shark & King, all Avant.
RULES
1) No magnets may be fitted.
- 2) Cars with in line or angle winder mounted motors may add up to 5 grammes ballast. Cars with side winder mounted motors may add ballast up to 10grammes.
- 3) Max axle width 65 mm rear, front, not more than 1mm outside the body on either side, measured with tyres fitted.
- 4) Any axles or wheels may be used from the manufacturers of the above eligible cars provided they fit without chassis modification, including Ninco Pro-race, NSR MB Slot, Hobby Slot & Slotline parts are allowed. No F1 size hubs.
- 5) Any bearings may be used from the above manufacturers. Bearings may be glued in. Roller bearings allowed.
- 6) Any proprietary tyres may be used front or rear provided that they fit the hubs. No silicon tyres. Tyres may be trued, tyres may be glued to hubs. No F1 size wheels.
- 7) Any motor may be used from the eligible list in any chassis, proprietary mounts may be used. Motors may not be modified. Motors may be glued and or taped in place.
- 8) Chassis may not be changed (exception see below), modified or painted, except to replace or reposition the motor or to reinforce the rear of the chassis on Ninco Honda NSX and Toyota Supra angle winders. Ninco, Slot.it, Spirit or similar motor mount may be used. Any hole caused by motor re-location must be filled with plasticard. Motor must not be visible from above. On cars where exhausts protrude through the body, these may be removed.
- 9) All cars must run with full interior and driver, except where the motor is repositioned interior may be modified. Body may be painted. Windows may not be painted. Lightweight interiors may be used but they must be from a recognised manufacturer such as Gom.
- 10) Body screws may be run loose.
- 11) Any guide blade may be used from the above eligible cars, provided it fits without chassis modification, guide blades and posts may be trimmed. Sprung guides may be used with or without spring or shortened spring.
- 12) Tyres must be of a consistent natural texture. No super glue or nail varnish or similar on tyres.
- 13) New cars or parts becoming available must be approved by the committee. Next introduction date 01/06/08.
- 14) Anything not mentioned in the rules is not allowed.
|