|
MHSC MODIFIED TOURING CARS 2011
ELIGIBLE CARS
Any Saloon from the Following manufacturers that raced from 1980 onwards::
Ninco, Fly , SCX, Scalextric, Proslot, Carrera, Spririt, MRRC. Note Spirit Peugeot Silhouette not allowed.
ELIGIBLE MOTORS
Motors will be from the following manufacturers:
Ninco, Fly, SCX, Scalextric, Proslot, Carrera, Spirit, Reprotec, Slot.it, MRRC/Scaleauto, NSR, Cartrix, Ozrace, MB Slot, Spirit, Hobbyslot.
RULES
1)No magnets may be fitted.
2)Cars with in line motors may add up to 5 grammes ballast. Cars with side winder or anglewinder mounted motors may add ballast up to 10grammes, anglewinders other than Ninco not allowed.
3)Max axle width 64 mm rear, but cannot be more than 1mm outside body. Front, not more than 1mm outside the body on either side, measured with tyres fitted.
4)Any axles may be used from the manufacturers of the above eligible cars provided they fit without chassis modification.
5)Wheels must be either original or from the following manufacturers: Slot.it, Hobby Slot, Spirit or Fly. Air hubs not allowed. No F1 size hubs.
6)Tyres may not be pneumatic to any degree.
7)Any bearings may be used from the above manufacturers. Bearings may be glued in. Roller bearings allowed.
8)Any proprietary tyres may be used front or rear provided that they fit the hubs. No silicon tyres. Tyres may be trued, tyres may be glued to hubs. No F1 size tyres. No Ortman Tyres.
9)Any motor may be used from the eligible list in any chassis, proprietary mounts may be used. Motors may not be modified. Motors may be glued and or taped in place.
10)Chassis may not be changed modified or painted, except to replace or reposition the motor or to reinforce the rear of the chassis on Ninco angle winders. Ninco, Slot.it, Spirit or similar motor mount may be used. Any hole caused by motor re-location must be filled with plasticard. Motor must not be visible from above. On cars where exhausts protrude through the body, these may be removed.
11)All cars must run with full interior and driver, except where the motor is repositioned interior may be modified. Body may be painted. Windows may not be painted. Oz V8s may run with blacked out windows but must have an interior. Lightweight interiors may be used but they must be from a recognised manufacturer such as Gom.
12)Body screws may be run loose.
13)Any guide blade may be used from the above eligible cars, provided it fits without chassis modification, guide blades and posts may be trimmed. Sprung guides may be used with or without spring or shortened spring.
14)Tyres must be of a consistent natural texture. No super glue or nail varnish or similar on tyres.
15)New cars or parts becoming available must be available from Slot 32 or Pendle Slotracing 4 weeks before a meeting to be eligible, then must be approved by the committee. Next introduction date 01/06/11.
16)Spirit Peugeot Silhouette is not allowed, they are now included in GTs.
17)HRS chassis or Hobby Slot equivalent allowed, inline or sidewinder configuration only, but offset mount is not allowed.
18)New Ninco Megane with floating motor mount is allowed but must use original motor and wheels.
19)Anything not mentioned in the rules is not allowed.
|
